Conduct

The Conduct RoofSupport wire mesh cable tray 65 x 300 mm is a 3 m length of high-grade steel tray for routing DC and AC cabling across flat roofs on solar PV installations. It is finished with the EZ1000 coating, which is highly corrosion...

The Conduct RoofSupport RoofBlockXL is a 3.5 kg concrete-filled, UV-resistant roof support for wider RoofSupport runs: two 100 mm trays side by side, or a single tray from 150 mm up to 600 mm. Its weight and construction give the stability needed for heavier...

The Conduct PVshelter RoofSet Type 150 is a robust canopy that protects an outdoor-mounted inverter from direct weather. It suits inverters with a mounting width of up to 1,500 mm and replaces the PVshelter Wall Type 150 (PVS200319-9-NA). Key Features Protects inverters up to...

The Conduct PVshelter B2B Type 300HE is a free-standing, back-to-back rooftop frame that takes inverters on both sides, up to a total mounting width of 300 cm (2 x 150 cm). The High Energy version adds extra bracing and an easily removable roof to...

The Conduct PVshelter Angled Type 130 is a free-standing rooftop mounting frame and shelter for inverters up to 130 cm wide (overall width 162 cm). The roof height adjusts to the inverter manufacturer's clearances using the QR code on the product, and a hinged...

The Conduct Batteryshelter Large in traffic white (RAL 9016) is the fire-safe outdoor enclosure for home battery systems (ESS), powder coated to ISO 12944 (C3) so it blends in with white rendered façades. It protects the battery from weather, theft and vandalism, keeps DC...

The Conduct Batteryshelter Large is a fire-safe, weatherproof outdoor enclosure for home battery storage systems (ESS), mounted on a non-combustible exterior wall. Built from Magnelis® steel, it protects the battery from weather, theft and vandalism, keeps DC cabling outside the house and, in the...

The Conduct RoofSupport cover 300 mm is a 3 m click-on lid for 300 mm RoofSupport wire mesh cable trays. Made from steel with a zinc-aluminium-magnesium (Zn-Al-Mg) coating, it shields PV cabling from UV, debris and mechanical damage on flat roofs. Key Features Fits...

The Conduct RoofSupport cover 200 mm is a 3 m click-on lid for 200 mm RoofSupport wire mesh cable trays. Made from steel with a zinc-aluminium-magnesium (Zn-Al-Mg) coating, it shields PV cabling from UV, debris and mechanical damage on flat roofs. Key Features Fits...

The Conduct RoofSupport cover 100 mm is a 3 m click-on lid for 100 mm RoofSupport wire mesh cable trays. Made from steel with a zinc-aluminium-magnesium (Zn-Al-Mg) coating, it shields PV cabling from UV, debris and mechanical damage on flat roofs. Key Features Fits...

The Conduct RoofSupport partition 60 mm is a 3 m divider for RoofSupport cable trays, so DC positive and negative conductors can be run separately as the standards require. It is made from ZAM3K (zinc-aluminium-magnesium) coated steel and is quick to fit. Key Features...

The Conduct reinforced coupling joins two lengths of RoofSupport wire mesh cable tray quickly and reliably, without extra connecting pieces. Made from stainless steel 304 for strength and corrosion resistance, it suits demanding rooftop environments and gives a neat, durable finish. Key Features Strong,...

The Conduct RoofSupport wire mesh cable tray 65 x 200 mm is a 3 m length of high-grade steel tray for routing DC and AC cabling across flat roofs on solar PV installations. It is finished with the EZ1000 coating, which is highly corrosion...

The Conduct RoofSupport wire mesh cable tray 65 x 100 mm is a 3 m length of high-grade steel tray for routing DC and AC cabling across flat roofs on solar PV installations. It is finished with the EZ1000 coating, which is highly corrosion...

The Conduct RoofSupport cover clamp is a stainless steel (304) clip that fixes a RoofSupport cover firmly to the wire mesh tray. It is designed for quick, secure and durable fitting where wind load is a factor. Key Features Stainless steel 304 for long-term...

The Conduct RoofSupport MountBlock is a low-profile support for fixing RoofSupport wire mesh trays to trapezoidal metal roofs or walls, where standard roof blocks will not fit. An integrated EPDM seal keeps the fixing airtight and watertight, and the small stand-off leaves room to...

The Conduct RoofSupport RoofBlock (Click) is a 1 kg concrete-filled, UV-resistant roof support for 60 mm and 100 mm RoofSupport wire mesh trays. The tray clicks into place without tools and the block sits on the roof without fixings, keeping cables lifted out of...